Office table with a robust structure, good stability and a solid thicker look with levelling adjustment to adjust with the uneven floor surface.
TOP:- 54mm thick dark coloured table top made up of 18mm thick pre-laminated particle board with two battens of same thickness fixed along two long edges from the bottom side which provide decorative twin coloured thick edge look. The decorative trim to be connected in a way to form connectivity of 45 degrees with gable end. Support stiffener made up of M.S. rectangular pipe of 20X40X0.8mm thickness is provided for extra support for the Top of the length of 1200mm and above.
LEG:- 18mm thick leg or gable end made up of 18mm thick pre-laminated particle board with two battens of same thickness fixed to it from front side providing straight as well as a consolidated thicker look to the table with two coloured edge profile.
MODESTY:- Modesty panel of lighter shade made up of 18mm thick pre-laminated particle board providing stability to structure and allow sufficient leg privacy to the user.
PEDESTAL AND RETURN STORAGE:-
Below table drawer unit with two books and one file drawer.
Storage with three shutters with good storage capacity usable as return storage for office storage.
CARCASS:- Top, side panel, bottom panel and skirting are made up of 18mm thick pre-laminated particle board are fixed with the back panel by proper grooving done on the back panel which is made up of 9mm thick pre-laminated particle board. The side panel, bottom and top panel are to be assembled with the help of wooden dowel, knock down fittings Drum with screw and corner fittings to ensure the stability of box structure formed.
DRAWER:- Provision of two books drawer of size 314(W) X 400(D) X 80(H) and one file drawer of size 314(W) X 400(D) X 225(H) made up of 12mm thick pre-laminated particle board with the bottom panel of 9mm thickness. The small drawers are mounted on a telescopic slide with 3/4 extension whereas the big drawer mounted on a telescopic slide with a full extension allowing storage of files with the help of file manager. Drawer fascia of lighter shade made up of 18mm thick pre-laminated particle board. Provision of centralizing locking for all three drawers and D type slim handle for drawer .
SHELF AND SHUTTER:- One adjustable shelf with three-point adjustment of 64mm from the lower position reference point, supported on shelf support lug & three shutters of lighter shade made up of 18mm thick pre-laminated particle board mounted on 0 crank hinges with the provision of D type Aluminum alloy slim handle. The shutters are lockable with the help of multipurpose square lock and tower bolt.
Table : (W) X 750(D) X 750(H)
Storage : (W) X 450(D) X 675(H)
Drawer Pedestal :(W) X 450(D) X 675(H)